 |
 |
 |
 |
 |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
Metalith™ H2O photo galleryAssembly Photos Metalith H2O flood fighting barrier cross panel intersection with stainless steel pin connector
 Metalith H2O panel connection joint showing stainless steel pin and bottom seal
 Inserting the corrosion resistant stainless steel pin connector into Metalith H2O side and cross panels
 Metalith H2O corrugated flood control panels during assembly
 Flood barrier bins connected using only a stainless steel pin
 A Metalith H2O corner with stainless steel pin assembly
 Metalith H2O completed bin sideview filled with sand
 Flood control bin being filled with a front loader's full load
 Angled turn for flood control bins
 A load of fill sand is deposited into the Metalith H2O aluminum wall flood control bin
 Looking down on a partial load of sand deposited into a Metalith H2O flood protection barrier bin
 Army Corps of Engineers Vicksburg flood-barrier test configuration constructed and partially filled
 A front loader finishing its dump of fill sand into an aluminum Metalith H2O flood fighting bin
 Flood protection bin partially filled with corner seal plastic
 USACE Vicksburg flood barrier test configuration mostly filled
 Metalith H2O flood fighting bins filled with loose sand
 USACE Vicksburg flood barrier test configuration showing 90º corner
 Army Corps of Engineers Vicksburg flood barrier test configuration showing a 63º turn
 90º turn for flood fighting barriers
 Metalith H2O aluminum panel edge with bottom seal
 Adding final touches of sand to flood protection barrier
 Simple pin insertion connects the side and wall panels of the Metalith H2O flood control barrier panels
 Completed corner joint of the aluminum Metalith H2O flood fighting barrier bins
Disassembly Photos Two men safely remove the Metalith H2O side panel from a filled flood protection bin
 Wet sand remains safely standing after flood fighting barrier panel is removed
 Fill sand remains after Metalith H2O flood control side panel is removed
 Fill sand begins to dry and spread after both Metalith H2O flood control side panels are removed
 Used Metalith H2O flood protection panels ready for cleaning for reuse
 Stainless steel connection pins being easily removed from the aluminum flood control panels
 Cross panel is removed from the Metalith H2O aluminum flood fighting bin
Log Impact Test Photos Army Corps of Engineers test log is hydraulically pulled to impact Metalith H2O flood barrier
 Post log impact on aluminum flood barrier panels showing minimal barrier movement
 Top view showing post log impact test showing dented but not damaged aluminum panels
 Side view show log impact test dents, but no breaches, to the Metalith H2O flood fighting barriers
 Side view show log impact test dents, but no breaches, to the Metalith H2O flood fighting barriers
Overtopping Test Photos Side view of water cascading over the Metalith H2O flood protection barrier during USACE Overtopping test
 Angled view of multiple flood fighting bins being subjected to the USACE Overtopping test
 Top view of Metalith H2O flood control bins during the Army Corps of Engineers Overtopping test
 Wide view of the Army Corps Flood Fighting Barrier Testing facility during the Metalith H2O
 Post Overtopping test showing minimal sand erosion from Metalith H2O aluminum flood control barriers
Riverine Test Photos Army Corps of Engineers preparations for the Riverine test
 Metalith H2O flood protection barriers waiting for the Riverine test
 Riverine test water flows against Metalith H2O flood control barriers
 Riverine test water flows against and overrun Metalith H2O flood control barriers
 Army Corps of Engineers Riverine test water flows over Metalith H2O flood fighting barriers
 Army Corps of Engineers test personnel measure water current speed during the Riverine test
 Test water flows of the top of the Metalith H2O flood control bin without washout or erosion occurring
Wave Test Photos Army Corps of Engineers wave test and the Metalith H2O flood mitigation barrier setup
 Wave test waters attempt to scour sand from the Metalith H2O flood fighting barriers to no avail
 USACE flood fighting barrier Wave test waves assaulting the Metalith H2O barriers
For more information about Infrastructure Defense Technologies’ flood barriers and erosion control barriers and applications, please call us at 1-800-379-1822, email us at info@metalithH2O.com, info@infrastructure-defense.com or fill out our contact form.
Product Info | Benefits | Applications | FAQs | Resources The Metalith H2O Copyright ©2003-2009 Infrastructure Defense Technologies.
|
|
For more information about the Metalith H2O flood fighting barriers, please request our FREE BROCHURE by mail. Or you can DOWNLOAD it here.
|
|
 |
